F-960 Instruction Manual rev. 6/23/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA
8
Phone: (360) 833-8835
[email protected]
www.felixinstruments.com
Continuous mode
Trigger Mode
Continuous mode
measures the air entering through the input
of the instrument continuously without stopping. Continuous
mode can be used
with or without the sample port
attached to
the front of the instrument. Data is saved to a file every one
second on the F-960.
Trigger mode
measures the air entering through the input of
the instrument, the pump will run and the sample will enter
until a stable reading has been achieved. The final values will be
displayed on screen and saved to the SD card. The pump will
then turn off until the user initiates a new measurement.
Trigger mode can be used with or without the sample port
attached to the front of the instrument. See the specifications
page for standard sample rate.
To change between modes, Navigate to Setup > Mode from the
main menu.
Measure
From the main menu, press the right arrow when the word
‘
Measure
’ is highlighted
to enter the measurement display
screen. All measurement parameters are saved to the SD card
every 1 second in continuous mode. When the SD card is not
present, the data will not be saved. The unit also comes
equipped with Bluetooth technology, designed for wireless
transfer of data (see
Transferring Files
) as well as a Wireless SD
memory card (see Wireless SD Memory Card Operation).
