F-960 Instruction Manual rev. 6/23/2017
1554 NE 3
rd
Ave, Camas, WA 98607, USA
50
Phone: (360) 833-8835
[email protected]
www.felixinstruments.com
VOC concentration
PolarCept saturation (min)
3 ppm
20
100 ppm
1
To fill the PolarCept filter, attach an empty syringe to the
hydrophobic filter. The plunger of the syringe should be
completely depressed. Lower the PolarCept over a cup of
distilled water and draw in
1.5 mL
with the syringe. Attach the
sample needle and tubing. To empty the PolarCept, re-attach
the syringe and push the water out of the PolarCept housing.
To properly use
PolarCept, keep the
sample needle
pointed down while
measuring. The water
in the filter should
“bubble” as the gas
sample is pulled
through, trapping interfering gases.
