manualshive.com logo in svg

Felder G 500, Руководство пользователя, Страница: 2 / 84

Поделиться
Скачать
Felder G 500 Скачать руководство пользователя страница 2

2

3

For the safety of all personnel, it is necessary to conscientiously study this manual before assembly and 

operation. This manual must be kept in good condition, as it belongs to the machine! Furthermore, keep 

the manual to hand and in the vicinity of the machine so that it is accessible to personnel when they are 

using, maintaining or repairing the machine.

Edgebander

G 500

Attention: The machine must be inspected immediately on arrival. If the machine was damaged during 

transport or if any parts are missing, a written record of the problems must be submitted to the forwarding 

agent and a damage report compiled. Be sure, also to notify your supplier immediately.

© FELDER Maschinenbau

Heiligkreuzerfeld 18

A-6060 Hall in Tirol

Tel.:  +43 (0) 5223 5850 0

Fax:  +43 (0) 5223 5850 62

Email:  [email protected]

Internet: www.felder.at

24. April 2007

FELDER

A product of the FELDER GROUP

Содержание G 500





















































































Отзывы:

Нет отзывов