8
en
Intended use of the power tool.
This power tool is intended for commercial use
in industry and trade, using the application tools
and accessories recommended by FEIN.
FSC1.6X/FSC1.6Q:
for trimming plastic beads, e. g. in the vehicles
sector,
FSC2.0Q:
for sawing thin sheet metal, wood and plastic
parts,
and for sanding smaller areas, corners and
edges,
for cutting out elastic sealants and marble
trass joints.
Operation of the power tool off power generators.
Operate the power tool only off
a.c. generators with sufficient power
output that do not have any distortion of the
voltage curve.
Operating the power tool off
power generators whose no-
load speed exceeds the voltage value on the
type plate of the power tool is prohibited.
WARNING
3 41 01 120 21 0.book Seite 8 Dienstag, 26. Mai 2009 2:21 14
