7
en
Emission values for sound and vibration
(Two-figure – specifications as per ISO 4871)
*These values are based on a work cycle con-
sisting of no-load and full-load operation of
the same duration.
For information on the vibration class
assigned to the application tool, please see the
enclosed data sheet 3 41 30 213 06 2.
Extension cord
If the use of an extension cable
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cable, power loss and
overheating of the power tool.
Otherwise, the
extension cable and power tool are liable to
electrical danger, and the working efficiency is
impaired.
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c., with only one power tool
FSC1.6X/FSC1.6Q/FSC2.0Q connected:
Sound emission
Measured A-weighted sound power level
L
wA
(re 1 pW), in decibels: 90
Measuring uncertainty K
wA
, in decibels: 3
A-weighted emission pressure power level
measured at the workplace L
pA
(re 20 µPa),
in decibels: 79
Measuring uncertainty K
pA
, in decibels: 3
REMARK: The sum of the measured emis-
sion value and respective measuring inaccu-
racy represents the upper limit of the
values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance
with the corresponding product standard.
Vibrations
Classification of FEIN
application tools accor-
ding to vibration class
Weighted
acceleration*
VC0
< 2.5 m/s
2
< 8 ft/s
2
VC1
< 5 m/s
2
< 16 ft/s
2
VC2
< 7 m/s
2
< 23 ft/s
2
VC3
< 10 m/s
2
< 33 ft/s
2
VC4
< 15 m/s
2
< 50 ft/s
2
VC5
> 15 m/s
2
> 50 ft/s
2
CAUTION
Cord Size in A.W.G.
Wire Sizes in mm
2
18
16
14
0.75
1.5
2.5
Cord Length in Feet
Cord Length in Meters
25
100
150
30
60
120
3 41 01 120 21 0.book Seite 7 Dienstag, 26. Mai 2009 2:21 14
