10
IMPAXX
®
IPX600 Series LED Light Heads
Federal Signal
www.fedsig.com
Unpacking the Product
• Operate your vehicle and its light/sound system in
accordance with your department’s Standard Operating
Procedures.
• If a selected function does not perform properly or if any
of the lamps remain illuminated when the control is off,
disconnect the power connector from the control unit and
contact the nearest service center.
• At the start of your shift, ensure that the entire warning
light system and the siren system is securely attached and
operating properly.
Failure to follow these safety instructions and precautions may
result in property damage, serious injury, or death.
Unpacking the Product
After unpacking the product, inspect it for damage that may
have occurred in transit. If it has been damaged, do not attempt
to install or operate it. File a claim immediately with the carrier,
stating the extent of damage. Carefully check all envelopes,
shipping labels, and tags before removing or destroying
them. Ensure that the parts listed in Table 1 are included in the
package. If you are missing any parts, contact Customer Support
at 1-800-264-3578, 7 a.m. to 5 p.m., Monday through Friday (CT).
Table 1 Package contents
Qty. Description
Part Number
2
Screw, #10 Type B, Six-Lobe, Black, SS
7011246-08
2
Screw, Thrd Frm, #8-32, Six-Lobe, Blk, SS
70000143-06
1
Bezel, Black, Polycarbonate
8652239
1
Gasket, Rubber
8652240
An Overview of the IPX600 Series
The IPX600 Series LED Light Heads are fully sealed, low current
warning lights that can be mounted on the inside or outside of
the vehicle. IPX600 uses SOLARIS
®
LED reflector technology
to provide a bright and effective secondary warning signal.
IPX600 models have 6, 12, or 18 LEDs that can be ordered in
