9
General Description
Signaling Standalone Manual
Federal Signal
www.fedsig.com
• Seven standard built-in warning signals: Wail, Steady, Alternate Wail, Alternate Steady,
Pulsed Wail, Pulsed Steady, Auxiliary Chime
• Broadcasts prerecorded voice or tone files
• Deliver intelligible voice messages from locally pre-recorded files
• Pre-recorded files: 250 messages with 15 minutes of recording time
• Ambient noise level monitoring with automatic volume control
• Individually configured for volume and noise-level adjustments
• Wall or pole mount options
• Four local alarm initiation inputs to activate unit locally or standalone operation
Momentary mode: contact closure sounds alarm for programmed duration.
Continuous mode: sounds alarm for duration of closure.
• Two relay outputs to control strobes or other devices (See “Using Optional Visual
Indicators” on page 22.)
• 120/240 Vac or 24 Vdc powered (two models)
• Wide outdoor temperature operating range
• The lnformerl00 models are designed specifically for use in Class I, Division 2,
Groups A, B, C, D; Class II, Division 2, Groups F and G; and Class III locations as
defined in the National Electrical Code (NEC) ANSI/NFPA 70.
The following is a picture of the Informer100 Speaker shown with optional 225XL Warning
Light.
Figure 1 Informer100 Speaker with 255XL light
