32
Programming
Informer100 Speaker (Models IS-I-IP100ACX and IS-I-IP100DCX)
Federal Signal
www.fedsig.com
1.
Click Network. The Network Settings page displays.
Fields
Description
Obtain an
IP address
automatically
When the device is rebooted, it obtains new network settings
automatically from the network DHCP server.
Use the
following IP
address
Supplies static settings. You must enter an IP Address, Subnet Mask,
and Gateway. A DNS server address is required only if domain names
are used instead of IP addresses.
IP Address or
Domain Name
The RTU’s assigned IPV4 address or its domain name in the IP
address field.
Subnet Mask
The RTU’s assigned subnet mask.
Default
Gateway
The RTU’s network gateway for routing IP traffic.
Primary DNS
The Primary Domain Name Server for the network. (Must be entered
if the RTU is required to connect to a server by its domain name.)
Secondary
DNS
The Secondary Domain Name Server for the network.
Apply
Saves your settings. You must reboot for changes to take effect.
2.
Select the Use the following IP address option button.
3.
Enter the static IP Address, Subnet Mask, and Default Gateway for the Informer
device.
4.
Click Apply.
5.
Reboot the device for the IP address change to take effect.
