INF-TN1FSH-E
- 45 -
4.4. Setting parameters
The units are displayed in metric or English system.
Description
Parameters can be set by entering numeric values or by selection.
Setting item
Input method
Range or menu
Direct input
Outer diameter of pipe specifications, etc. can be entered directly.
•
Values cannot be entered exceeding the number of digits in the input range.
•
If negative values are not included in the input range, a symbol key “
±
” is
ignored.
•
Use symbols that are displayed. If “12” is entered in a state where symbol
“
−
” is displayed, it is interpreted as “
−
12.”
Numeric
value input
Change input
Specific numeric values only in outer diameter, etc. of pipe specifications can
be changed.
Item selection
Lining materials, etc. of pipe specifications can be selected.
Selection
Numeric
selection
Numeric values such as transmission voltage of the system can be selected.
Direct input
(example)
When entering outer diameter 114.3 mm
Key operation
Description
Display
Select “OUTER DIAMETER”
OUTER DIAMETER
60.00 mm
ENTER
Enter numeric value enter mode.
OUTER DIAMETER
60.00
#
mm
1 1 4 . 3
Enter “114.3” using ten keys.
OUTER DIAMETER
114.3
#
mm
ENTER
Press ENTER.
OUTER DIAMETER
114.3 mm
Change input
(example)
When changing outer diameter 114.3 mm to 115.3 mm
Key operation
Description
Display
Select “OUTER DIAMETER”
OUTER DIAMETER
114.30 mm
ENTER
Enter numeric value enter mode.
OUTER DIAMETER
114.30
#
mm
%
Move the cursor to left. The value “0,” on which
the cursor is placed, can be changed.
OUTER DIAMETER
114.3
0
mm
% %
Move the cursor to left. The value “4,” on which
the cursor is placed, can be changed.
OUTER DIAMETER
11
4
.30 mm
5
Enter “5” using ten keys.
OUTER DIAMETER
11
5
.30 mm
ENTER
Press ENTER.
OUTER DIAMETER
115.30 mm
