INF-TN1FSH-E
- 101 -
6.1.2.3. Measurement data information
Description
The information of data measured by time difference and pulse Doppler methods can be checked.
The following table lists the data information.
Time difference
Pulse Doppler
Wedge S.V. [m/s]
(Theoretical value)
Wedge S.V. [m/s]
(Theoretical value)
Wedge angle [
°
]
(Theoretical value)
Wedge angle [
°
]
(Theoretical value)
Pipe S.V. [m/s]
(Theoretical value)
Pipe S.V. [m/s]
(Theoretical value)
Angle in pipe [
°
]
(Theoretical value)
Angle in pipe [
°
]
(Theoretical value)
Lining S.V. [m/s]
(Theoretical value)
Lining S.V. [m/s]
(Theoretical value)
Angle in lining [
°
]
(Theoretical value)
Angle in lining [
°
]
(Theoretical value)
Fluid S.V. [m/s]
(Theoretical value)
Fluid S.V. [m/s]
(Theoretical value)
Wedge temperature [
°
C]
Wedge temperature [
°
C]
Angle in fluid [
°
]
(Theoretical value)
Angle in fluid [
°
]
(Theoretical value)
Total time [
µ
s]
(Theoretical value)
Transmission frequency [MHz]
Window open [
µ
s]
(Theoretical value)
Sampling frequency [kHz]
Line 1
1: Total time [
µ
s]
Receive wait time [
µ
s]
1: Forward time [
µ
s]
Repetition frequency [Hz]
1: Reverse time [
µ
s]
Transmission pulse No.
1: Time difference [ns]
Reference count
1: Delay time [
µ
s]
No. of channels
1: Fluid S.V. [m/s]
Measurement range
1: Angle in fluid [
°
]
Phase angle shift
1: Raynolds No.
Start gain
1:
K
End
gain
1: Velocity [m/s]
Start distance [mm]
1: Signal power (F) [%]
Channel width [mm]
1: Signal power (R) [%]
Start channel No.
1: Trigger level (F) [%]
End channel No.
1: Trigger level (R) [%]
Velocity coefficient
1: Signal peak (F)
Line 1-F
Power [E
4
]
1: Signal peak (R)
Deviation
Line 2: Same as Line 1
Success rate [%]
Line 1-R: Same as Line 1-F
Line 2-F: Same as Line 1-F
Line 2-R: Same as Line 1-F
MAX RANGE [Range unit]
