FCI 7100 SERIES, Инструкция по установке и эксплуатации

Страница: 41 / 47

Main
Log
Show Events
1: Opens Show Events menu.
2: Opens Print Log menu.
3: Prompts for OK; if accepted, clears the event log and resets the
panel.
4: Initiates a sensor sensitivity printout.
Scrolls through all logged events, beginning with the most recent
event. If user attempts to scroll beyond the end (or beginning) of
the log, End of log is displayed briefly, then the last (or first) event
is redisplayed.
Display cannot give instructions, since it contains all the informa-
tion about the event being displayed (same as the display you
would see when the event occurred).
If there is no log printout in progress, starts a printout as shown
above. Once the printout begins, or if a printout is in progress
when this menu is opened, the message and function change to
“3:Abort printout”. Printout starts immediately, not when OK is
pressed.
If printout completes while this menu is still open, the text of the
menu doesn’t change until user presses a key.
Shows the systems software version, time and date of the most
recent change to configuration program, and number of menu
used to make the change (i.e., what was changed).
Main
Log
Print Log
Main
Info
Main
Log
[PRINT} 1:All events 2:Last 20
[LOG]
[PANEL] Software Last Cfg. Change
[INFO ] V1.2-001 12:23 07/23/99 33
[VIEW] 1:Display Log 2:Print Log
[LOG ] 3:Clear Log 4:Sens. Report
(Display shows a log entry)
9000-0447 39 of 43
Technical Manuals Online! - http://www.tech-man.com