FCI 7100 SERIES, Инструкция по установке и эксплуатации

Страница: 18 / 47

3.3 Notification Appliance Circuits
The 7100 provides two (2) 24 VDC Class B, Style Y
notification appliance circuits. Class A, Style Z operation is
accomplished by adding the Class A Option (CAOM)
Module.
For use with any UL Listed notification appliance having
a nominal operating voltage of 24 VDC.
Wiring Instructions
NAC 1 - TB1-1 (+), TB1-2 ( - )
NAC 2 - TB1-3 (+), TB1-4 ( - )
(Polarity markings indicate the polarity of the circuit in
alarm condition).
Use U.L. Listed End of Line Resistor EOL-N (47K),
P/N 4700-0512
Circuit Ratings
24 VDC regulated
Max. alarm load 1.5 amp./circuit
Supervised
Power limited
NOTE: The CAOM module is furnished with End of Line
resistor installed.
3.4 Signaling Line Circuits
The 7100 provides one (1) or two (2) 24 VDC Class B,
Style 4 signaling line circuits. Class A, Style 6 or 7 opera-
tion is accomplished by adding the Class A Option
(CAOM) Module. See Figure 2 for Style 4 or 6 wiring, and
Figure 3 for Style 7 wiring.
Wiring Instructions
SLC 1 - TB3-1 (+), TB3-2 ( - )
SLC 2 - TB3-3 (+), TB3-4 ( - ) (7100-2 only)
(Polarity markings indicate the polarity that should
be maintained throughout the circuit. Polarity must be
observed on all devices connected to the circuit).
Circuit Ratings
24 VDC (nominal)
Current:
0.090 amp max. (supervisory)
0.097 amp max. (alarm)
0.750 amp max. (short circuit)
40 ohms max. line resistance
0.5 uf max. line capacitance
18 AWG minimum, straight lay or twisted pair
Power Limited
Supervised
1 (+)
2 (-) BSM
EOL
1 (+)
2 (-)
CAOM
DOTTED LINES INDICATE CLASS A,
STYLE Z WIRING. REMOVE EOL
FOR CLASS A, STYLE Z
OPERATION
- +
- +
Figure 1 Notification Appliance Circuit Wiring
1 (+)
ASD
AOM
AMM
2 (-)
1 (+) 2 (-)
CAOM
DOTTED LINES INDICATE CLASS A,
STYLE 6 WIRING
BSM
Figure 2 Signaling Line Circuit Wiring
16 of 43 9000-0447
Technical Manuals Online! - http://www.tech-man.com