manualshive.com logo in svg

Fayat Dynapac DFP11, Руководство по эксплуатации, Страница: 94 / 112

Поделиться
Скачать
Fayat Dynapac DFP11 Скачать руководство пользователя страница 94

5.

Stand the machine upright.

NOTICE!
Components may get damaged!

Do not use low-ash engine oils for the exciter shaft

housing.

6.

Fill in fresh oil up to the bottom edge of the opening.

7.

Screw in the oil drain plug (1).

8.

Dispose of oil in an environmentally friendly way.

8.8.7  Replacing the air filter

NOTICE!
Danger of engine damage!

–

Do not start the engine after having removed

the air filter.

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Park the machine safely

 

Ä

 Chapter 6.5 ‘Parking the machine

in secured condition’ on page 65

.

2.

Allow the engine to cool down.

3.

Unscrew wing nut (1) and remove cover (2).

4.

Clean the cover.

5.

Unscrew wing nut (3) and remove filter element (4).

6.

Check the rubber seal (5), replace if necessary.

The rubber seal frequently sticks to the filter

element.

Fig.  96

Fig.  97

Maintenance – Annually

 

DFP11

 

94

Содержание Dynapac DFP11

















































































































Отзывы:

Нет отзывов