Fayat Dynapac DFP11, Руководство по эксплуатации, Страница: 88 / 112

8. Check the O-ring (2) for damage, replace if necessary.
9. Install the filter (1).
Observe the alignment (A) of the filter on the housing.
10. Assemble the filter bowl (3) with the O-ring.
11. Unscrew the hexagon nuts (2) and the hexagon screw (1)
and take off the fuel tank.
12. Loosen the hose clamp (1) and pull off the fuel hose.
13. Unscrew the fuel strainer (3) with the seal (2).
14. Clean the fuel strainer, check the condition of the screen,
replace if necessary.
15. Turn the fuel strainer tightly in with the new seal.
16. Assemble the fuel hose with the hose clamp.
1
2
3
A
1
B-HON-0039
Fig. 80
A View from below: Alignment of
filter during installation
1
2
B-834-0038
Fig. 81
2
1
B-834-0039
3
Fig. 82
Maintenance – Annually
DFP11 88