Fayat Dynapac DFP11, Руководство по эксплуатации, Страница: 102 / 112

3. Crank the engine several times with the recoil starter to dis-
tribute the oil in the cylinder.
4. Screw the spark plug back in.
5. Slowly pull the starter rope until resistance can be felt and
the alignment mark (2) on the starter disc is in line with the
upper bore (1).
ð
Valves are closed so that no moisture can enter into the
cylinder.
6. Slowly guide the starter rope back.
1. After shutting down store the machine under cover in a dry
and well ventilated room.
2. Repair damaged paint; preserve bare areas thoroughly with
anti-corrosive agent.
3. Cover the engine to protect it against dust and moisture.
4. A machine with conserved engine must be clearly marked by
attaching an information sign.
8.9.6.2 Measures before restarting
DANGER!
Danger to life caused by explosive gas-air
mixes!
– Do not allow gasoline to come into contact with
hot components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and
other sources of ignition.
– Do not spill any gasoline.
1. Check the oil levels.
2. Check hoses and lines for cracks and leaks.
3. If the fuel was drained off before shutting down, you must
now fill in fuel.
4. Clean the machine thoroughly.
5. Start the engine and run it for 15 to 30 minutes with idle
speed.
2
1
B-834-0035
Fig. 110
Parking the machine
Maintenance – As required
DFP11 102