Fayat Dynapac DFP11 Скачать руководство пользователя страница 24

Страница: 24 / 112

3.4.2 Safety regulations and environmental protection regulations for handling gas-

oline

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep away from heat sources, sparks and

other sources of ignition.

–

Do not spill any gasoline.

WARNING!
Health hazard caused by contact with gasoline!

–

Wear your personal protective outfit (protective

gloves, protective clothing).

–

Do not inhale any fuel fumes.

–

Do not swallow gasoline.

–

Avoid contact with gasoline.

ENVIRONMENT!
Gasoline is an environmentally hazardous sub-

stance!

–

Always keep gasoline in proper containers.

–

Immediately bind spilled gasoline with an oil-

binding agent and dispose of in accordance

with regulations.

–

Dispose of gasoline and fuel filter according to

regulations.

Fig. 4

Concerning your safety – Handling fuels and lubricants

DFP11

Содержание Dynapac DFP11

















































































































Результаты поиска

Содержание Dynapac DFP11

Отзывы:

Fayat Dynapac DFP11, Руководство по эксплуатации, Страница: 24 / 112

Результаты поиска

Содержание Dynapac DFP11

Отзывы: