Fayat Dynapac DFP11 Скачать руководство пользователя страница 25

Страница: 25 / 112

3.4.3 Safety regulations and environmental protection regulations for handling fuel

stabiliser

WARNING!
Danger of burning by ignited fuel stabilizer!

–

Do not allow fuel stabilizer to come into contact

with hot components.

–

Smoking and open fire is prohibited.

WARNING!
Health hazard caused by contact with fuel sta-

bilizer!

–

Wear your personal protective outfit (protective

gloves, protective clothing).

–

Do not inhale any fuel stabilizer fumes.

–

Do not swallow fuel stabilizer.

–

Avoid contact with fuel stabilizer.

ENVIRONMENT!
Fuel stabilizer is an environmentally hazardous

substance!

–

Immediately bind spilled fuel stabilizer with an

oil-binding agent and dispose of according to

regulations.

–

Dispose of fuel stabilizer according to regula-

tions.

Concerning your safety – Handling fuels and lubricants

DFP11

Содержание Dynapac DFP11

















































































































Результаты поиска

Содержание Dynapac DFP11

Отзывы:

Fayat Dynapac DFP11, Руководство по эксплуатации, Страница: 25 / 112

Результаты поиска

Содержание Dynapac DFP11

Отзывы: