Fayat Dynapac CC900G Скачать руководство пользователя страница 49

Страница: 49 / 104

Miscellaneous

Remember to unlock the articulation before

operating.

Raise the locking arm (1) and turn it 180 degrees

upward. Check that the cotter pin (2) is guided

correctly into position for unlocking the articulation.

4812274432.pdf

2017-07-10

Miscellaneous

Locking the articulation

Fig. Steering joint

1. Locking arm

2. Cotter pin in locked position

Turn the steering wheel to the straight ahead position.
Raise the locking arm (1) and turn 180 degrees

downward. Ensure that the cotter pin (2) is guided into

its lower position correctly for locking the articulation.

Lifting the roller

Weight: refer to the hoisting plate on

the roller

Fig. Roller prepared for lifting

1. Hoisting plate

The machine’s gross weight is specified on the

hoisting plate (1). Refer also to the Technical

specifications.

The machine’s gross weight is specified on the

hoisting plate (1). Refer also to the Technical

specifications.

Lifting gear such as chains, steel wires, straps,

and lifting hooks must be dimensioned and used

in accordance with the applicable safety

regulations for lifting devices.

Lifting gear such as chains, steel wires, straps,

and lifting hooks must be dimensioned and used

in accordance with the applicable safety

regulations for lifting devices.

Stand well clear of the hoisted machine! Make sure

that the lifting hooks are properly secured.

Stand well clear of the hoisted machine! Make sure

that the lifting hooks are properly secured.

Fig. Articulated joint

1. Locking arm

2. Cotter pin in open position

Unlocking the articulation

Remember to unlock the articulation before

operating.

Содержание Dynapac CC900G









































































































Результаты поиска

Содержание Dynapac CC900G

Отзывы:

Похожие инструкции для Dynapac CC900G

Бренды по названию

Популярные бренды

Fayat Dynapac CC900G, Инструкция по эксплуатации

Результаты поиска

Содержание Dynapac CC900G

Отзывы:

Похожие инструкции для Dynapac CC900G

Бренды по названию

Популярные бренды