Fayat Dynapac CC900G Скачать руководство пользователя страница 40

Страница: 40 / 104

Operation

Make sure that the area in front of and behind the

roller is clear.

4812274432.pdf

2017-07-10

Carefully move the forward/reverse lever (6) forwards

or backwards, depending on which direction of travel

is required.
Speed increases as the lever is moved away from the

neutral position.

The speed should always be controlled using the

forward/reverse lever and never by changing the

engine speed.

The speed should always be controlled using the

forward/reverse lever and never by changing the

engine speed.

Test the function of the reserve brake by activating

parking brake (3) while the roller is moving slowly

forwards and backwards.

Check when operating that the warning lamps do not

come on.
A hydraulic fluid cooler is recommended for warm

ambient temperatures and long operating periods

Driving

Operating the roller

Figure. Instrument panel

1. Ignition key

2. Speed control

3. Parking brake

6. Forward/Reverse lever

8. Sprinkler knob

10. Emergency stop

Under no circumstances is the machine to be

operated from the ground. The operator must be

seated inside the machine during all operation.

Under no circumstances is the machine to be

operated from the ground. The operator must be

seated inside the machine during all operation.

Deactivate parking brake knob (3). Be prepared that

the roller can move.
Check that the steering is working correctly by turning

the steering wheel once to the right and once to the

left while the roller is stationary.
When compacting asphalt, remember to turn on the

sprinkler system (8).

Make sure that the area in front of and behind the

roller is clear.

Содержание Dynapac CC900G









































































































Результаты поиска

Содержание Dynapac CC900G

Отзывы:

Похожие инструкции для Dynapac CC900G

Бренды по названию

Популярные бренды

Fayat Dynapac CC900G, Инструкция по эксплуатации

Результаты поиска

Содержание Dynapac CC900G

Отзывы:

Похожие инструкции для Dynapac CC900G

Бренды по названию

Популярные бренды