Fayat Dynapac CC900G, Инструкция по эксплуатации

Страница: 43 / 104

Operating - Stopping
Fig. Control panel
1. Key
2. Engine speed control
3. Parking brake
4. Vibration On/Off
6. Forward/reverse lever
Press the switch (4) to switch off the vibration.
Move the forward/reverse lever (6) to the neutral
position to stop the roller.
For shorter stopping periods, in which the operator
needs to stand up with the engine running, it is
important to check that the brake light is lit, including
when stopping briefly on sloping ground.
Turn the engine speed control (2) back to idling and
stop the engine. Switch off the machine using the key
(1). Activate parking brake knob (3).
35
4812274432.pdf 2017-07-10
Operating - Stopping
Braking
Normal braking
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
4
3
1
6
2