Fayat Dynapac CC1100 VI Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 233

Fayat Dynapac CC1100 VI Скачать руководство пользователя страница 100

Miscellaneous

4812164501.pdf

2021-05-06

Weight: see the machine plate on the
roller

Fig. Four-point lift of the roller
1. Machine plate

1

Lifting the roller

The maximum weight of the machine (5) can be
read on the machine plate (1).

The maximum weight of the machine (5) can be
read on the machine plate (1).

Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment.

Lifting equipment such as chains, steel wires,
straps and lifting hooks must be dimensioned in
accordance with the relevant safety regulations
for the lifting equipment.

Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.

Stand well clear of the hoisted machine! Make sure
that the lifting hooks are properly secured.

The machine must not be lifted with chips in the
chip spreader.

The machine must not be lifted with chips in the
chip spreader.

5

Fig. Four-point lift of the roller - Rear
forks
1. Location of the lifting hook

1

1

Fig. Four-point lift of the roller - Front
forks
1. Location of the lifting hook

86

«
...
98
99
100
101
102
...
»

Содержание Dynapac CC1100 VI










































































































































































































































Отзывы:

Нет отзывов