Fayat BOMAG BW 120 AD-5 Скачать руководство пользователя страница 94

Страница: 94 / 210

5.10 Checking the hydraulic oil filter

WARNING!

Danger of burning on hot compo-

nents!

– Wear your personal protective

equipment (protective gloves,

protective clothing).

– Avoid touching hot components.

Protective equip-

ment:

Working clothes

Safety shoes

Protective gloves

The maintenance indicator is a mechanical

indicator which must be checked at operating

temperature.

Make sure that no persons are in the

danger zone during maintenance work.

Drive the machine onto level, firm ground.

Shift the travel lever to “Middle” position

and engage it in parking brake position.

The machine will decelerate down to a

standstill and the parking brake will be

applied after approx. 2 seconds.
The parking brake warning light lights

up.

B-ELE-0263

Fig. 60

Checks prior to start up – Checking the hydraulic oil filter

BW 120 AD-5

Содержание BOMAG BW 120 AD-5



















































































































































































































Результаты поиска

Содержание BOMAG BW 120 AD-5

Отзывы:

Бренды по названию

Популярные бренды

Fayat BOMAG BW 120 AD-5, Инструкция по эксплуатации

Результаты поиска

Содержание BOMAG BW 120 AD-5

Отзывы:

Бренды по названию

Популярные бренды