manualshive.com logo in svg

Fayat BOMAG BW 120 AD-5, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BW 120 AD-5 Скачать руководство пользователя страница 41

3.6  Starting up the machine
3.6.1  Prior to commissioning

Only use machines which have been serviced

at regular intervals.
Become acquainted with the equipment, the

indicators and control elements, the working

principle of the machine and the working area.
Use your personal protective equipment (hard

hat, safety boots, if necessary also goggles

and ear protection).
Make sure that the machine is equipped with

the required lighting according to the require-

ments of the application.
Do not take any loose objects with you or

fasten them to the machine.
Before mounting the machine check whether:

n

persons or obstructions are beside or under

the machine;

n

the machine is free of oily and combustible

materials;

n

all access steps, grips and platforms are free

of obstacles, grease, oils, fuel, dirt, snow

and ice;

n

all safety elements are in place;

n

all maintenance flaps and doors are closed

and locked.

Climb onto or off the machine only when the

machine is standing. Use the existing access

steps and grips.
When climbing on and off the machine use the

three-point support method: Always keep two

feet and one hand or one foot and two hands

on the machine.
Never jump off the machine.
Before commissioning, carry out all required

visual inspections and function tests.

Concerning your safety – Starting up the machine

 

BW 120 AD-5

 

41

Содержание BOMAG BW 120 AD-5



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды