Fayat Group DYNAPAC DR6Xe, Инструкция по эксплуатации и техническому обслуживанию, Страница: 76 / 88

10. Hold the [black] measuring tip to the housing (2) of the con-
verter.
11. One after the other, hold the [red] measuring tip to all flat plug
connections on the battery connector (1).
Check each cable connection for at least
3 seconds.
12. Press the trigger on the [red] measuring tip to start the meas-
urement.
ð
Nominal value: greater than 0.5 MOhm.
13. Hold the [black] measuring tip to the gearbox housing (1) of
the machine.
14. One after the other, hold the [red] measuring tip to each of
the three cable connections (2), (3) and (4) of the converter.
Check each cable connection for at least
3 seconds.
15. Press the trigger on the [red] measuring tip to start the meas-
urement.
ð
Nominal value: greater than 0.5 MOhm.
16. Attach the cover again and tighten it.
17. Insert the battery
Ä
Chapter 6.1.1 ‘Inserting the battery’
on page 52 .
18. Switch on the machine and check the function.
Checking the battery connectors to
converter housing
S-541-0005
1 2
Fig. 52
Checking the cable connections to
gearbox housing
S-541-0006
1
2
3
4
Fig. 53
B-541-0200
Fig. 54
Maintenance – Annually
DR6Xe 76