manualshive.com logo in svg

Fayat Group DYNAPAC DR6Xe, Инструкция по эксплуатации и техническому обслуживанию, Страница: 19 / 88

Поделиться
Скачать
Fayat Group DYNAPAC DR6Xe Скачать руководство пользователя страница 19

3.1.5  Improper use

Dangers may arise from the machine when it is used for purposes

other than the one it is intended for.

Any danger caused by improper use is the sole responsibility of the

operating company or driver/operator, the manufacturer cannot be

made liable.

Examples for improper use are:

n

Working in horizontal direction

n

Ramming of poles

n

Vibrating of paving blocks

It is not permitted to stand on the machine while working.

starting and operation of the machine in explosive environments

and in underground mining is prohibited.

3.1.6  Estimated service life of the machine

If the following general conditions are met, the service life of the

machine is usually in the range of several thousand operating

hours:

n

Regular safety inspections by an expert / qualified person

n

Performance of the prescribed maintenance work within the

specified time

n

Immediate performance of necessary repair work

n

Exclusive use of original spare parts

Concerning your safety – Basic prerequisites

 

DR6Xe

 

19

Содержание DYNAPAC DR6Xe

























































































Отзывы:

Нет отзывов