Fayat Group DYNAPAC DR6Xe, Инструкция по эксплуатации и техническому обслуживанию, Страница: 28 / 88

3.6 Starting up the machine
3.6.1 Prior to commissioning
Only use machines which have been serviced at regular intervals.
Become acquainted with the equipment, the indicators and control
elements, the working principle of the machine and the working
area.
Wear personal protective equipment.
Do not take any loose objects with you or fasten them to the
machine.
Before start-up, check whether:
n persons or obstructions are next to or in front of the machine;
n the machine is free of oily and combustible materials;
n all safety elements are in place;
n all grips are free of grease, oils, fuel, dirt, snow and ice.
Before commissioning, carry out all required visual inspections and
function tests.
If the tests reveal damage or other defects, the machine must not
be operated until these have been rectified.
Do not operate the machine with defective indicators and control
elements.
3.6.2 Switching on the machine
Electrical connections and contacts on the machine must be clean
and dry.
The machine must not be operated with damaged, missing or non-
functional safety installations.
Before switching on and moving the machine, make sure that there
is nobody in the danger zone.
Keep feet clear of the tamper foot plate.
Always keep an eye on the machine when the engine is running
and hold it by the steering rod.
Concerning your safety – Starting up the machine
DR6Xe 28