manualshive.com logo in svg

Fayat Group DYNAPAC DR6Xe, Инструкция по эксплуатации и техническому обслуживанию, Страница: 62 / 88

Поделиться
Скачать
Fayat Group DYNAPAC DR6Xe Скачать руководство пользователя страница 62

7.3  Lashing the machine to the transport vehicle

Do not use lashing points that are damaged or impaired in any

way.

Always use appropriate lashing tackle at the lashing points.

Use lashing tackle only in the specified loading direction.

Lashing tackle must not be damaged by machine parts.

Protective equipment:

n

Working clothes

n

Protective gloves

n

Safety shoes

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

1.

Lean the tamper foot against the side wall of the transport

vehicle.

2.

Fasten the machine on the transport vehicle with at least two

suitable lashing belts.

3.

When the battery is removed, cover the electrical connec-

tions to protect them from moisture.

B-541-0188

Fig.  38

Loading / transporting the machine – Lashing the machine to the transport vehicle

 

DR6Xe

 

62

Содержание DYNAPAC DR6Xe

























































































Отзывы:

Нет отзывов