Fayat Group DYNAPAC DR6Xe, Инструкция по эксплуатации и техническому обслуживанию, Страница: 72 / 88

4. Tilt the machine backward and collect running out oil.
5. Stand the machine on its foot again and secure it against
tipping over.
6. Clean the drain plug and screw it in with sealing agent (low-
strength, e.g. spare parts number DL 009 700 16).
7. Unscrew the filler screw.
8. Fill in fresh oil up to the bottom edge of the filler bore.
9. Clean the filling plug and screw it back in with a new seal
ring.
10. Check the oil level in the inspection glass, correct if neces-
sary.
The upper edge of the inspection glass
equals the bottom edge of the oil filling bore.
11. Dispose of oil in line with environmental regulations.
B-541-0195
Fig. 44
B-541-0196
Fig. 45
B-541-0193
Fig. 46
Maintenance – Annually
DR6Xe 72