Fayat Group DYNAPAC CC224C, Инструкция по эксплуатации

Страница: 78 / 168

Operation
4812159701_D.pdf 2021-03-16
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
The machine always starts in the Transport
position, without it being possible to use off-set,
vibration or sprinkling. The machine always starts in the Transport
position, without it being possible to use off-set,
vibration or sprinkling.
If the machine and drums are in off-set mode,
switch to work mode and reset before loading the
machine on a truck. This is indicated by a warning
in the display. If the machine and drums are in off-set mode,
switch to work mode and reset before loading the
machine on a truck. This is indicated by a warning
in the display.
Display when activating choice via the button
set.
The parking symbol is shown when the parking brake is
activated.
= Display of alarm, see table for information.
= Automatic Water Control (AWC), sprinkling is
activated when the F/R lever is outside neutral.
= High amplitude
= Vibration on front and rear drum.
= Operating position, off-set, vibration and sprinkling
possible. The symbol flashes in off-set mode, in neutral
(reset off-set) the symbol shines constantly.
= Automatic Vibration Control (AVC),
vibration is activated when the F/R lever is
outside neutral.
66