Fayat Group DYNAPAC CC224C, Инструкция по эксплуатации

Страница: 59 / 168

Machine description
4812159701_D.pdf 2021-03-16
"MACHINE SETTINGS"
The selection "Sprinkler Pump: 1 & 2" is in machine
settings.
If the machine is fitted with double sprinkler pumps
(Option) this is the menu in which the selection is
made for which of the sprinkler pumps are to be
activated to water the drum(s).
If the machine is fitted with accessories, e.g. a Chip
spreader, the settings for these can also be changed.
"WORKMODE SETTINGS"
This section is protected by Pin Code
There are 3 different modes that can be seleted in the
machine's workmode. (Soft, Medium, Hard).
The machine alerts at startup when the setting is in
Soft Mode.
Diesel engine (Stage V)
"EXHAUST CLEANING"
Normally not necessary to use.
Initiate cleaning can be used if the Exhaust System
Cleaning Lamp is shown in the display. Then a
so-called parked regeneration can be done and the
parking button must be activated and that low speed is
selected, then the speed will increase to
1000-1200rpm for 20-45 minutes depending on the
soot load.
Note that the engine must have reached operating
temperature before this can be done.
47