Fayat Group DYNAPAC CC224C, Инструкция по эксплуатации

Страница: 152 / 168

Maintenance - 1000h
4812159701_D.pdf 2021-03-16
Air conditioning (Optional)
Drying filter - Inspection
With the unit in operation, check using the sight glass
(1) that bubbles are not visible on the drying filter.
Figure. Drying filter
1. Sight glass
2. Filter holder
1
2
Park the roller on a level surface, chock the wheels
and activate the parking brake. Park the roller on a level surface, chock the wheels
and activate the parking brake.
The filter is placed at the top of the rear part of the cab
roof.
If bubbles are visible through the sight glass, this
indicates that the refrigerant level is too low. Stop the
unit to avoid risking damage. Fill up with refrigerant.
The refrigerant circuit is only to be worked on by
authorized companies. The refrigerant circuit is only to be worked on by
authorized companies.
Steering hitch - Tightening
Fig. Steering hitch
1. Nut
1
Nobody must be allowed near the steering joint
when the engine is running. Risk of being
crushed when the steering is operated. Switch
off the engine and activate the parking brake
before lubricating. Nobody must be allowed near the steering joint
when the engine is running. Risk of being
crushed when the steering is operated. Switch
off the engine and activate the parking brake
before lubricating.
The easiest way to identify if you have this type of
steering hitch is that it has a new type of nut (1) at the
top, as shown.
Actual torque (Nm) should be when the machine's
position is straight ahead.
M14 174 Nm M14 174 Nm
M16 270 Nm M16 270 Nm
140