Fayat Group DYNAPAC CC224C, Инструкция по эксплуатации

Страница: 48 / 168

Machine description
4812159701_D.pdf 2021-03-16
No Designation Symbol Function No Designation Symbol Function
24 Rpm switch, diesel engine Three-position switch for idling (LO), intermediate speed (MID)
and working speed (HI).
NOTE: The lever must be in neutral (LO) when starting the
machine. The engine also runs at low speed when stationary,
more than approx. 10 seconds if the F&R lever is in neutral.
If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a fuel
optimization system, MID is replaced by ECO (and the switch
is green).
24 Rpm switch, diesel engine Three-position switch for idling (LO), intermediate speed (MID)
and working speed (HI).
NOTE: The lever must be in neutral (LO) when starting the
machine. The engine also runs at low speed when stationary,
more than approx. 10 seconds if the F&R lever is in neutral.
If the F&R lever is moved out of neutral the speed will
increase to the set speed again. If the machine has a fuel
optimization system, MID is replaced by ECO (and the switch
is green).
25 Parking brake When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards you)
and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
25 Parking brake When pressed, the parking brake is activated.
To release the brakes, slide the red part back (towards you)
and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
To activate the brakes, press the top of the switch to change
the position of the lever.
To release the brakes, press down the red part at the same
time as the switch and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
To activate the brakes, press the top of the switch to change
the position of the lever.
To release the brakes, press down the red part at the same
time as the switch and change the position of the lever.
NOTE: When starting the machine, the parking brake must
be activated.
26 Hazard warning lights Activate the hazard warning light by depressing the button. 26 Hazard warning lights Activate the hazard warning light by depressing the button.
27 Rotating beacon Activate the rotating beacon by depressing the button. 27 Rotating beacon Activate the rotating beacon by depressing the button.
28 Gravel spreader Activating the gravel spreader. Manual/Automatic spreading.
(CC224-324, CC2200-3200) 28 Gravel spreader Activating the gravel spreader. Manual/Automatic spreading.
(CC224-324, CC2200-3200)
29 Gear position switch Activates the three different gear positions: (1), (2), (3). The
current gear position is shown in the display by means of the
following figures. 29 Gear position switch Activates the three different gear positions: (1), (2), (3). The
current gear position is shown in the display by means of the
following figures.
Position 1: Used for maximum hill-climbing capacity during
vibratory compaction Position 1: Used for maximum hill-climbing capacity during
vibratory compaction
Position 2: Normal position Position 2: Normal position
36