Fast 30400-KIT-EZ-EF, Инструкция по эксплуатации

Страница: 39 / 70

39

None – Select if EZ-EFI
®
will not be controlling ignition timing.

EZ-LS/XIM – Select if using a FAST™ EZ-LS™ or FAST™ XIM™ Ignition System.

FAST Distributor – Select if using a FAST™ Dual-Sync Distributor or other discrete, square
wave-type RPM signal.

FAST Crank Trigger / 2 Wire – Select if using a FAST™ Crank Trigger or other 2-wire
inductive, sine-wave type RPM signal.
EZ-LS/XIM Setup

EZ-LS – Select if using a FAST™ EZ-LS™ ignition system.

GM – Select if using a FAST™ XIM™ ignition system on a GM LS engine.

Ford – Select if using a FAST™ XIM™ ignition system on a Ford Mod or Coyote engine.

Chrysler – Select if using a FAST™ XIM™ ignition system on a Chrysler Hemi engine.
Ignition Timing
Setting up a timing curve is simple using the hand-held. Adjusting the three values explained below
will allow the ECU to construct a full, RPM-based timing curve. This takes the place of changing
weights and springs to adjust mechanical advance in a traditional distributor.