Fast 30400-KIT-EZ-EF, Инструкция по эксплуатации

Страница: 15 / 70

15
In-Tank Fuel Pump Wiring:
Wiring needs to be passed into the tank to power the pump. A sealed bulkhead fitting and other wiring
components are supplied for this purpose. Some of the final assembly is left for the user to complete to
custom fit the installation to their vehicle.
Electrical Bulkhead Fitting Notes:

The electrical fitting uses the single nylon washer with the larger inside diameter (compared to
washers used with the fuel line fittings).

Drill an 11/16" hole. Feed the fitting through the plastic washer and through the hole in the
tank. Secure the fitting with the plastic lock nut. Tighten it to approximately 33 in.-lbs.

The fitting has holes for passing two wires into the tank. Once the wires are passed through the
fitting, the dome nut on top is tightened to compress the seal and make a liquid tight seal
around the wires. Tighten it to approximately 22 in.-lbs.