FAST AG Solutions Fast Sprayers 9500 Series, Руководство оператора

Страница: 9 / 104

4
2.2 OPERATING SAFETY
1. Read and understand the Operator’s Manual
and all safety signs before using.
2. Place all controls in neutral, stop tractor
engine, turn monitor off, set park brake,
remove ignition key, wait for nozzles to stop
spraying before servicing, adjusting, repairing
or unplugging.
3. Before spraying a field, be familiar with all
potential hazards: trees, rocks, ditches,
gullies, etc. Plan the spraying route to avoid
hazards. Remember you are driving a wide
machine. USE CAUTION WHEN CORNER-
ING.
4. Keep hands, feet, hair and clothing away from
all moving and/or rotating parts.
5. Do not allow riders on the sprayer or tractor
during operation or transporting.
6. Clear the area of all bystanders, especially
children, before starting or filling with water or
chemical.
7. Stay away from wing pinch points when
folding or extending wings. Keep others
away.
8. Stay away from power lines when extending
or folding wings. Electrocution can occur
without direct contact.
9. Read chemical manufacturers warnings,
instructions and procedures before starting
and follow them exactly.
10. Do not breathe, touch or ingest chemicals.
Always wear protective clothing and follow
safe handling procedures.
11. Spray only when potential for chemical drift is
at a minimum. Even small amounts can affect
neighboring crops or sensitive plants and
people.
12. Dispose of chemical containers by triple
rinsing them into the sprayer tank or thor-
oughly rinsing, crushing and delivering to
regional disposal site.
13. In case of poisoning, get immediate medical
attention.
14. Only rinse sprayer while still in the field.
Spray the rinse thinly over the field already
sprayed. Never contaminate the farmyard or
drainage systems with sprayer rinse.
15. Do not eat in the field when spraying.
16. Before applying pressure to the hydraulic
system, make sure all components are tight
and that steel lines, hoses and couplings are
in good condition.
17. Before applying pressure to chemical system
make sure that all connections are tight and
that all hoses and fittings are in good condi-
tion.
18. Review safety instructions annually.