FAST AG Solutions Fast Sprayers 9500 Series, Руководство оператора

Страница: 54 / 104

49
35. Ground Speed Sensor
(Optional):
A.
Sprayers that are
equipped with an auto-
matic controller must
have a way to measure
ground speed. A mag-
netic sensor is mounted
on the right hand wheel.
Be sure the magnet
clearance is set and
maintained at 1/8 inch (3
mm) or the thickness of a
nickel.
a. Magnetic Speed
Sensor.
b. Metal Posts.
c. Wiring Harness to
Tractor Radar.
Fig. 44 GROUND SPEED SENSOR
Fig. 46 GROUND SPEED SENSOR RAVEN RADAR
B. The ground speed proximity
magnetic sensor system is
located on the right wheel. It
consists of the magnetic
sensor and the associated
wiring. To generate the
required signal, the magnet
must be set and maintained
at the proper distance from
the pegs.
Set the magnet at 1/8 inch (3
mm) or the thickness of a
nickel from the pegs. Use
the adjusting nuts and
threads on sensor to set the
gap. Be sure to tighten
fasteners carefully as to not
strip threads on plastic
sensor.
C. Ground Speed Sensor
(Optional):
Raven Radar (TYP installa-
tion shown). Refer to set-up
instruction enclosed with
Radar and Raven Controller
for set-up and calibration
information.
Fig. 45 SENSOR MOUNTING
b
a b