FAST AG Solutions Fast Sprayers 9500 Series, Руководство оператора

Страница: 48 / 104

43
Fig. 37 BOTTOM FILL VALVE
2" Bottom Fill
Optional 3" Bottom Fill
d. Suction Line Valve:
This 3 position valve controls
the flow into the pump. Point
the arrow to the left to draw
water from the front rinse
tank. Point the arrow down to
close the suction line and stop
the flow into the pump. Point
the arrow to the right to draw
solution from the main tank.
e. Bottom Fill Main Tank:
This valve controls the flow of
water into the main tank.
Turn the handle parallel to
the line to direct the flow of
water into the main tank.
Turn the handle at right angle
to the line to stop the flow.
Always close the valve when
not filling the tank.
IMPORTANT
Always turn the
pointer toward the
rinse or main tank
before starting the
pump. The pump
must have solution
flowing through it to
cool the seals. It is
recommended that the
valve be turned to the
main tank unless
rinsing the system to
minimize the chance
of damaging the pump
seals.
NOTE
An optional 3 inch
intake line is available
to allow for faster
filling.
e
d
D
E
E