Faro FaroArm Fusion Скачать руководство пользователя | Manualshive

Страница: 111 / 130

background image

B-7

SPECIFICALLY DISCLAIMS ANY WARRANTY OR LIABILITY
RELATED TO THE FITNESS OF THE SYSTEM FOR ANY
PARTICULAR PURPOSE OR ARISING FROM THE INABILITY OF
THE PURCHASER TO USE THE SYSTEM FOR ANY
PARTICULAR PURPOSE.

5.00Design Changes

5.01The FaroArm, the Software and the System are subject to changes
in design, manufacture and programming between the date of order and
the actual delivery date. FARO reserves the right to implement such
changes without the Purchaser’s consent, however, nothing contained
herein shall be construed as obligating FARO to include such changes in
the FaroArm, Software or System provided to the Purchaser.

6.00Non-Disclosure

6.01All Software including, without limitation, the Operating System
Program and any FARO special user programs, provided to the
Purchaser as part of the system, either at the time of or subsequent to the
delivery of the FaroArm, is the intellectual property of FARO. The
Purchaser shall not reproduce or duplicate, disassemble, decompile,
reverse engineer, sell, transfer or assign, in any manner the Software or
permit access to or use thereof by any third party. The Purchaser shall
forthwith execute any further assurances in the form of non-disclosure
or licensing agreements which may reasonably be required by FARO in
connection with the software.

7.00Entire Agreement / Governing Law / Miscellaneous /
Guarantee

7.01These Purchase conditions constitute the entire agreement between
FARO and the Purchaser in respect to the Product. There are no
representations or warranties by FARO, express or implied, except for
those herein contained and these conditions supersede and replace any
prior agreements between FARO and the Purchaser.

7.02No representative of FARO has any authority to modify, alter,
delete or add to any of the terms or conditions hereof. Any such
modifications shall be absolutely void unless made by instrument in
writing properly executed by an actual authorized employee or agent of
FARO.

7.03The terms and conditions hereof shall be binding upon FARO and
the Purchaser, and shall be construed in accordance with the laws of the
State of Florida, United States of America.

08M46E00_FaroArmUSB.book Page 7 Tuesday, February 17, 2009 1:42 PM

«
...
109
110
111
112
113
...
»

Содержание FaroArm Fusion



































































































































Отзывы:

Нет отзывов

Похожие инструкции для FaroArm Fusion

Бренд: F.W. Bell Страницы: 75

Бренд: Waltron Страницы: 11

Бренд: Labom Страницы: 6

Бренд: Labom Страницы: 5

Бренд: Mahr Страницы: 384

Бренд: Hanna Instruments Страницы: 2

Бренд: Aqua Lung Страницы: 24

Бренд: BizLine Страницы: 62

Бренд: SOMFY Страницы: 40

Бренд: Velleman Страницы: 15

Бренд: Konica Minolta Страницы: 42

Бренд: Kobold Страницы: 12

Бренд: Hanna Instruments Страницы: 28

Бренд: National Instruments Страницы: 24

Бренд: dacell Страницы: 39

Telecaster Bass

Бренд: Fender Страницы: 16

Бренд: AlazarTech Страницы: 60

Бренд: Kobold Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды