26
26
112712
Revision date: 09.21.18
ps
i
0
40
20
60
80
10
0
psi
0
40
20
60
80
10
0
psi
0
40
20
60
80
100
ps
i
0
40
20
60
80
10
0
psi
0
40
20
60
80
100
ps
i
0
40
20
60
80
100
psi
0
40
20
60
80
10
0
On-Floor Drain Channel
9
ASSEMBLE AND INSTALL THE ON-FLOOR DRAIN CHANNEL
The on-floor GT70 drain channel is designed to deliver drain water away from
the fodder system to a holding tank, drain, or other predetermined destination.
Before gluing the channel parts together, determine whether the drain channel
will work better as two, short single channels with open ends, or as a longer
single channel as shown.
NOTE:
The on-floor drain channel helps direct drain water away from the fodder
system to a predetermined location. Additional materials may be needed to
achieve the desired results. Contact your sales representative to purchase
additional channels, splices, and end caps if needed.
Complete these steps to assemble the drain channel.
1. Gather the parts shown at the right.
2. Using the pvc primer and pvc cement, assemble the on-floor drain channel.
3. After the cement has set, move the drain channel into position under the
downspouts.
111127
111128
111129
111003Z120
WR6990 PVC
Cement and
113372 PVC
Purple Primer
NOTE:
Once the gutter is cemented,
it cannot be disassembled without
damaging the components.
End Cap
Splice
Assemble and Install On-Floor Drain Channel
