12
12
111628E
Revision date: 02.16.23
1
Assembly Instructions
ASSEMBLE MAIN FRAME: Outer Frame Tubes
Gather the parts and complete the steps that follow to assemble the outer frame tubes.
Required parts for
each outer frame tube
:
• (1) S15P116 Square Tube (plain)
• (3) 111485 2-Way Square Tube Fittings
• FA4482B Tek Screws and Magnetic Nut Setter (3/8" x 2-9/16")
Complete these steps:
1. Slide one 2-way connector (111485) onto one end of the S15P116 tube and set the tube aside.
Do not secure the fitting to the tube.
2. Using Figures A and B, mark the S15P116 tube using a 111485 fitting as a guide.
3. Attach a 2-way connector to each end of the tube as shown. Secure using one Tek screw for each connector. Verify that the length of the
assembled
tube is 119 1/2"
.
Do not install outer frame tube flush with the end of the connectors.
The smaller off-set tube of the connection slides over each
shelf support tube attached to the end frames.
See diagrams and photos.
4. Repeat the steps to assemble
all remaining outer frame tubes
.
5. Continue by assembling the main frame.
Fig. A: Pre-mark tube for
easier assembly.
Fig. B: Minor adjustments to
the connector position will be
require when setting length.
Approximate End of Tube
S15P116
Outer Tube
Open end of
connector
Open end of
connector
Length 1
19 1/2"
outside-to-outside
Slide this fitting onto the
tube. Do not secure at
this time.
