21
Revision date: 02.16.23
111628E
1
Assembly Instructions — Install Tray Supports (113157)
There are two (2) 113157 tray supports for each fodder tray/channel. Supports are installed between the support arms of the main fodder system frame. At this
stage in the assembly, set each pair of 113157 supports in place on the fodder frame.
Supports are repositioned after channels are set on the frame and
aligned as needed for proper spacing.
Review the photos that follow and set the 113157 supports in place.
113157
Tray
Support
113157
Tray
Support
Bottom of
Fodder Tray
After setting trays/channels in place, adjust the positions
of all 113157 supports so the vertical leg of each support
aligns with the center of channel. Supports can remain
loose on the frame, or they can be secured to the support
arms as shown later in these instructions. Continue with
the procedures that follow.
Frame Support
Arm – End
Frame Support
Arm – End
113157
Tray
Support
Vertical Leg
of Support
Frame Support
Arm – Middle
ATTENTION:
If you marked each set of 113157 tray supports so you could reinstall on the same level in the same locations (Step 12 on Page 15), reference those marks when
setting the supports back on the frame.
