7
Revision date: 02.16.23
111628E
Important Information
SPECIAL NOTES AND CAUTIONS
The support frame for the 111628E FodderPro 2.0 Full Feed System —
Expanded is designed to save assembly time and to better serve your
growing needs. Before you begin, read the information that follows.
CAUTION!
DO NOT CLIMB ON FRAME!
TO PREVENT INJURY AND POSSIBLE DAMAGE TO THE
FODDER SYSTEM AND RELATED COMPONENTS, NEVER
CLIMB ON THE ASSEMBLED OR PARTIALLY ASSEMBLED
FRAME.
NEVER USE THE FRAME ENDS AS A LADDER TO REACH THE
UPPER LEVEL OF THE FODDER FRAME!
ALWAYS POSITION THE FODDER TRAYS ON THE DIFFERENT
LEVELS IN A WAY THAT EVENLY DISTRIBUTES THE WEIGHT.
NEVER LOAD ALL HEAVY TRAYS ON ONE SIDE OR ON THE
TOP LEVEL OF THE ASSEMBLED FRAME. ALWAYS PLACE
HEAVY TRAYS ON THE LOWER LEVELS ON EACH SIDE OF THE
FRAME.
NEVER REMOVE MATURE FODDER FROM TRAYS ON ONE SIDE
OF THE FRAME ONLY. ALTERNATE FROM SIDE TO SIDE TO
MAINTAIN EVEN WEIGHT ON THE FRAME WHEN HARVESTING
FODDER.
AFTER FRAME SLOPE IS SET, ANCHOR THE BASE RAIL
OF EACH FRAME END TO THE CONCRETE USING ANCHOR
BOLTS WHEN POSSIBLE. PURCHASE BOLTS LOCALLY OR
CALL YOUR SALES REPRESENTATIVE FOR ADDITIONAL
INFORMATION.
CONSULT THE SERVICES OF A QUALIFIED CONTRACTOR FOR
OTHER WAYS TO ANCHOR YOUR SYSTEM WHEN IT IS NOT
POSITIONED ON CONCRETE.
ATTENTION:
CONSULT ALL DIAGRAMS AND THOSE NEAR THE
BACK OF THIS GUIDE TO IDENTIFY CRITICAL DIMENSIONS, PART
NUMBERS, AND PART LOCATIONS FOR THE FODDER FRAME.
Diagram above shows the end frame for your 111628E
FodderPro 2.0 Full Feed System — Expanded.
