35
│ 53
Manual
TRITON HEAVY 660 PS
SETTING THE WORKING DEPTH OF THE CHISELS DURING WORK WITHOUT THE
ROLLER
▪
When working without the rollers, the depth can be set using the transport axle.
▪
Working without rollers is especially convenient when the conditions are wet, or when a coarser soil
structure is required, for example, in winter.
▪
It is forbidden to work on the axle when the rollers are lifted; the rollers must be disassembled for work.
▪
The depth is set by clips on the axle piston-rods.
▪
Set the depth according to the sticker on the axle and check the setting during work.
▪
Removing the small washer (dark blue, 13 mm) increases the working depth by about 30 mm; the large
washer (grey, 25 mm) increases the depth by about 55 mm.
Both piston-rods of the axle must have the same number of clips!!!
Examples:
We wish to work with chisel depth 25 cm.
1.
Set 9 space washers in all roller piston rods.
2.
Set the tractor arms at a position so that the main frame of the machine is horizontal with the ground.
Working with a chisel depth of 18 cm with disassembled rear roller
1.
Place 6 grey clips and 4 blue clips on the piston rods of the transport axle.
2.
Set the tractor arms at a position so that the main frame of the machine is horizontal with the ground.
