30
│ 53
Manual
TRITON HEAVY 660 PS
8
MACHINE
TRANSPORT
ON
ROADS
Transport position of
TRNH 660 PS
▪
Connect the machine by attaching it to the tractor.
▪
Lift the machine on the axle, switch the ball valve of the axle to the closed position.
▪
Fold the side frames to the transport position, switch the ball valve to the closed position.
▪
Install the transport rod between the side frames (see the picture).
▪
Set the tractor three-point hitch arms at 85 cm to ensure the transport height below 4 metres (see the
picture).
▪
Tighten the centre piece on the rod by screwing and secure with locking nut.
▪
The machine must be equipped with removable shields with marking of contours, functional lighting,
and the board of the rear marking for slow vehicles (according to ECE No. 69).
▪
The lighting must be activated during travelling on roads.
▪
The tractor must be equipped with a special light device of an orange colour, which must be activated
during travelling on roads.
▪
The maximum transport speed during travelling on roads is
30 kph.
Transportation is only permitted when the connecting rod has been properly installed and
secured!
CONNECTING
ROD
1
2
3
CONNECTING
ROD
