39
│ 53
Manual
TRITON HEAVY 660 PS
10
MACHINE
MAINTENANCE
AND
REPAIR
Observe the safety instructions for treatment and maintenance.
▪
If it is necessary to weld during the repair and have the machine connected to the tractor, it must have
disconnected supply cables from the alternator and the accumulator.
▪
Check the tightening of all screw and other assembly connections at the machine before every use of
the machine, furthermore continuously as needed.
▪
Continuously check the wear of the working bodies of the machine, possibly replace these worn working
bodies with new ones.
▪
Adjustment, cleaning, and lubrication of the machine may only be performed with the machine at rest
(i.e. the machine is standing and not working).
▪
When working on a lifted machine, use suitable support equipment supported at marked points or at
points suitable for that.
▪
During adjustment, cleaning, maintenance, and repair of the machine, you must secure those parts of
the machine that could endanger the operator by falling or another movement.
▪
For catching the machine during handling using lifting equipment, use only the places marked with self-
adhesive labels with the chain sign "
".
▪
Upon a failure or damage of the machine, immediately turn off the tractor's engine and secure against
restarting, secure the machine against movement
only then you can remove the failure.
▪
During repairs of the machine, use exclusively the genuine spare parts, suitable tools and protective
equipment.
▪
Regularly check the prescribed pressure in the machine tyres and the condition of the tyres. Perform
possible repairs of the tyres in an expert workshop.
▪
Check the indicator of loose nuts, “Check Point”, regularly according to the instructions.
▪
Keep the machine clean.
Do not clean hydraulic cylinders and bearings with a high-pressure cleaner or direct water
stream. The seals and bearings are not watertight at high pressure.
