Farmet TRITON HEAVY 660 PS, Руководство по эксплуатации

Страница: 41 / 53

41
│ 53
Manual
TRITON HEAVY 660 PS
10.2 REPLACEMENT OF THE WORKING ROLLER BEARINGS
•
Always follow the safety regulations and directives when replacing the bearings of rollers.
•
The machine must be aggregated with the tractor according to Chapter “ 6. /p.28 ” when replacing the
bearings. The tractor engine must be switched off for the replacement of bearings and the operator, or
repairman, must prevent any access to unauthorised persons to the tractor.
•
Only replace the roller bearings on a solid and flat ground and when the machine is in standstill.
•
In the case of leaks in the tractor hydraulic system, you are required to provide mechanical supports under
the machine drawbar.
1 – Roller bearing 1 – Bolt
2 – Spacers
3 – Pin cylinder
øD – 40 mm – Bolt M10 (50 Nm) / M8 (20 Nm)
øD – 45 mm – Bolt M12 (86 Nm) / M10 (20 Nm)
øD – 50 mm – Bolt M12 (86 Nm) / M10 (20 Nm)
øD – 60 mm – Bolt M12 (86 Nm) / M10 (20 Nm)
1