18
│ 53
Manual
TRITON HEAVY 660 PS
CLOSING VALVES FOR DRIVING
▪
For the transport purpose it is necessary to close following ball valves!
When driving on road it is necessary to keep the machine locking lever in the RIGHT position,
i.e. locked, and the ball valve of the tow bar piston rod closed, as shown on the label on the
machine.
2.1
HYDRAULICS OF THE MACHINE
When disconnecting the quick-couplers, both valves on the drawbar must be closed in the same way as for road
transportation.
Connect the hydraulics only when the hydraulic circuits of the machine and the tractor (aggregate) are in a
pressure-less condition.
The hydraulic system is under high pressure. Regularly check for leaks and immediately remove obvious damage
of all lines, hoses, and pipe unions.
When seeking and removing leaks, use only the suitable tools.
For connecting the hydraulic system of the machine to the tractor, use the plug (on the machine) and the socket
(on the tractor) of the quick-couplers of the same type. Connect the quick-couplers of the machine to the
hydraulic circuits of the tractor so that the
RED
DUST CAPS
for
folding side frames and for setting the depth of
the front levelling discs are on one control circuit, the
YELLOW
DUST CAPS
for lifting the machine on the axle are
on the second control circuit, the
GREEN
DUST CAPS
for setting the front disc section are on the third control
circuit, the
BLUE
DUST CAPS
for controlling the rear packer discs are on the fourth control circuit, and the
WHITE
DUST CAPS
for controlling the setting of the working depth of the machine on the rollers is on the fifth control
circuit and the
BLACK DUST CAPS
for pressurizing chisel protection are on the sixth circuit.
In order to prevent accidental or foreign person (children, passengers) caused movement of
the hydraulics, the control switchboards on the tractor must be secured or blocked in the
transport position.
LOCKING FOR TRANSPORT ON ROADS
