Farm King 1370, Руководство оператора и каталог запасных частей

Страница: 28 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger
26
CONNECTING TO TRACTOR
Hitching The Equipment
Attach the auger to the tractor whenever the
equipment is moved around the yard or into
working position.
Tow the equipment by truck when traveling long
distances (see
“Transportation” on page 39 ).
Make sure that bystanders, especially small
children, are clear of the working area.
Be sure that there is sufficient room and clearance
to back up to the machine.
WARNING
Before moving the tractor, look in all directions
and make sure no bystanders, especially small
children are in the work area. Do not allow anyone
between the tractor and the equipment when
backing up to the equipment for connecting.
Move the tractor backwards, aligning the drawbar
with the Backsaver Auger hitch.
NOTE: The jack may need to be lowered or raised
for proper alignment of the drawbar and
hitch.
If the Backsaver Auger hitch needs to be adjusted,
stop the tractor when drawbar is just in front of
the Backsaver Auger hitch.
Leave the operator’s position.
ENTERING & LEAVING THE
OPERATOR’S POSITION
Entering The Operator’s Position
Enter the operator’s position, start the engine, and
release the parking brake.
IMPORTANT
Follow the instructions in your tractor’s operation
manual for the correct procedure.
Leaving The Operator’s Position
Always perform the following steps when leaving
the operator’s position:
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.