Farm King 1370 страница 29 Скачать руководство пользователя

Страница: 29 / 146

Operation - 1370, 1385, 1395, 13114 Backsaver Auger

Figure 8

Turn the handle (Item 1) clockwise to raise the hitch
or counterclockwise to lower the hitch

[Figure 8]

Lower or raise the Backsaver Auger hitch until
aligned with the tractor’s drawbar.

Move to the operator’s seat, start the engine and
release the parking brake.

Move the tractor backwards, aligning the drawbar
hitch pin hole with the Backsaver Auger hitch pin
hole(s).

Stop the tractor and leave operator’s position.

WARNING

AVOID INJURY OR DEATH

Keep fingers and hands out of pinch points when
connecting and disconnecting equipment.

NOTE:

Always use a hitch pin of adequate size
and strength and a retaining pin with a
locking device.

Figure 9

Install the hitch pin (Item 1) and retaining pin to
securely fasten the Backsaver Auger hitch to the
tractor drawbar

[Figure 9]

Attach the safety chain (Item 2) around the drawbar

[Figure 9]

Connecting The P TO Driveline

WARNING

AVOID INJURY OR DEATH

Warnings on the machine and in the manuals are
for your safety. Failure to obey warnings can cause
serious injury or death.

NOTE:

Clean and grease tractor’s PTO shaft and
PTO driveline coupling each time driveline
is connected.

Stop the engine and leave the operator’s position.

IMPORTANT

Improper hitch installation can cause PTO
driveline damage. Do not modify the hitch or use
an unapproved hitch. Make sure the PTO driveline
is of adequate length and that u-joints are in the
correct phase

Remove the PTO driveline from the storage
position (if applicable).

Содержание 1370



















































































































































Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды

Farm King 1370, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 1370

Отзывы:

Похожие инструкции для 1370

Бренды по названию

Популярные бренды