Farm King 1370 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 146

Farm King 1370 Скачать руководство пользователя страница 55

Maintenance - 1370, 1385, 1395, 13114 Backsaver Auger

53

Figure 48

Loosen all cable clamps along the cable being
tightened.

Tighten the nut (Item 1) of the desired bridging
cable on tube

[Figure 48]

Tighten both left and right cables evenly.

Tighten the upper bridging cable until the
discharge end of the tube bows up slightly.

Tighten the lower bridging cable to hold the tube
in the slightly raised position.

After tightening the lower and upper cables, check
that the auger tube is straight. No bend right or
left.

NOTE:

If the nut is fully tightened and bottoms
out against the eye of the adjustment bolt,
the cable will need to be loosened and
additional adjustments will be made on
the opposite end of the cable.

If the nut bottoms out against the eye of the
adjustment bolt, loosen the nut (Item 1)

NOTE:

Do not remove the nut from the adjustment
bolt.

After adjusting the cable(s), tighten all cable
clamps along the cable(s).

Figure 49

Remove bolt (Item 1) and lock nut (from mounting
bracket on the bottom tube section), move the yoke
(Item 2) back, one hole. Re-install the bolt and lock
nut. Tighten until the yoke is securely fastened to
the tube mount

[Figure 49]

Repeat for adjusting remaining bridging cables.

1

1

2

«
...
53
54
55
56
57
...
»

Содержание 1370



















































































































































Отзывы:

Нет отзывов